akred
07-25 08:04 PM
I have found that SBI is the most cost effective one. There is some inconvienience as you have to register with them, but every transfer after that can be accomplished with a fax to their offices.
wallpaper Tattoo calligraphy fonts
gcnyc
06-20 11:29 PM
Does any one know answer for this? I was curious to know.
skv
07-18 01:51 PM
Atlanta PERM Center belongs to DOL not USCIS
We need more people to know about the issue at the Atlanta PERM center.
I'm sure, our immigrationvoice will support as always. :-)
We need more people to know about the issue at the Atlanta PERM center.
I'm sure, our immigrationvoice will support as always. :-)
2011 Japanese Calligraphy Tattoos
spicy_guy
04-08 04:58 PM
I believe the intention of not moving too much beyond jul 06 , may be to make some spill over benfit happen to EB3 also. If they open the gate for EB2 now, lots of 485 application may come in and there may not be spill over to EB3. :)
Krupa
See how bad EB3 I shape is...
7,100 until 2002 Dec. That means, 2.5+ years before it hits Jan 1, 2003.
What about the people with PD > 2005. 33,400 / 2800 per year. 11+ years. :)
Retire!
Krupa
See how bad EB3 I shape is...
7,100 until 2002 Dec. That means, 2.5+ years before it hits Jan 1, 2003.
What about the people with PD > 2005. 33,400 / 2800 per year. 11+ years. :)
Retire!
more...
ushkand
07-20 10:44 AM
I sent in form G-325 for both me and my wife along with my I-485 instead of the G-325A as required on I-485 instructions by oversight. What do you guys recommend I do? Should I send in a new application or just send in the G-325A form with a letter stating the issue? Please help.
bkarnik
04-18 09:21 AM
Guys:
Before we get all excited and start signing petitions, please check to confirm whether you are legally safe by doing so. For more information please see this link from Murthy website http://www.murthy.com/news/n_parele.html
I write this because the petition is sponsored by a campaign manager for Kennedy. Please be very careful in signing such petitions. I would recommend discussing any such petition on this forum and getting input from the IV folks or from your lawyers before signing any petition that supports an individual or any particular political party.
Before we get all excited and start signing petitions, please check to confirm whether you are legally safe by doing so. For more information please see this link from Murthy website http://www.murthy.com/news/n_parele.html
I write this because the petition is sponsored by a campaign manager for Kennedy. Please be very careful in signing such petitions. I would recommend discussing any such petition on this forum and getting input from the IV folks or from your lawyers before signing any petition that supports an individual or any particular political party.
more...
tyson
01-11 11:38 AM
Guys: One way to get involved is to find Congressional candidates (especially Republicans) and educate them. If you really want to push them along, ask can you help with their campaign.
For example, Eddie Adams in the Tampa Bay Area, is more open to discussion than the current incumbent. And, if he can be found open to backing legislation to expedite the Green Card process; then this movement has a new friend.
He is certainly (like most Republicans) no friend of illegal immigration. But, he might be open to pressuring the USCIS to move the legal immigration applications along.
For example, Eddie Adams in the Tampa Bay Area, is more open to discussion than the current incumbent. And, if he can be found open to backing legislation to expedite the Green Card process; then this movement has a new friend.
He is certainly (like most Republicans) no friend of illegal immigration. But, he might be open to pressuring the USCIS to move the legal immigration applications along.
2010 Chinese Calligraphy Tattoo
GotGC??
05-15 11:50 AM
Here's a rather strange and may be uncommon situation for someone I know who needs suggestions from gurus here...such huge PD movements do result in strange situations such as these :)
EB3 India Labor + I-140 certified with PD Feb 2003
EB2-140 pending at NSC hoping to port the EB3 PD date
So both cases are now current, which leads to a couple of options for AOS:
1. File based on approved EB3 (and risk a potential retrogression in future)
2. File based on pending EB2 140 before it is approved (and risk potential RFE, etc. and who knows if it would be too late to revert to the EB3)
The other option is to upgrade the EB2 140 to PP, but could you please list the relative merits of the above two options?
EB3 India Labor + I-140 certified with PD Feb 2003
EB2-140 pending at NSC hoping to port the EB3 PD date
So both cases are now current, which leads to a couple of options for AOS:
1. File based on approved EB3 (and risk a potential retrogression in future)
2. File based on pending EB2 140 before it is approved (and risk potential RFE, etc. and who knows if it would be too late to revert to the EB3)
The other option is to upgrade the EB2 140 to PP, but could you please list the relative merits of the above two options?
more...
same_old_guy
02-23 02:01 PM
Dont worry you will get your RFE soon. I saw pretty much everyone is getting RFE for H1 extension ( beyond 6 yr) these days !
hair Persian Calligraphy Tattoos
reddymjm
12-04 04:52 PM
I am also flying to Chennai in 2 days.
more...
neogator
01-19 05:20 PM
Although your question is quite laughable and absurd, you could make a point by asking of a list of people who gave up on immigration to the US because of the EB3 backlog. And if these people did make it big..then you have a point.
hot back to calligraphy tattoo
pappu
07-16 02:35 PM
This is just a recycle of WSJ article that came out today. Nothing new. IV posted this last Friday already and we were the first. Please use your judgment and not use such comments as inside information.
more...
house Arabic calligraphy tattoo
ragz4u
03-15 11:39 AM
hi Super_Moderator,
Why cant we try to add now..instead of waiting for later time..to add this ammendment thru some senator or somebody for filing 485 during retrogression...
just to know whey we need to wait for later to add this...
Unfotunately thats not the way the US political system works! Just as we are trying to get pro-immigrant stuff in, there are others who are trying to negate our force and in fact get any pro immigrant stuff out! Example, numbersusa.
As I have said in my previous post, we are trying to push for the pro-immigrant package at every step. It could happen now, it could happen later, in the worst case it might not happen at all! There are a lot of forces involved in this.
What is in our control is to keep trying and not give up till the very end. And make no mistake, we are doing that every second coz we are in the same boat as you are.
Why cant we try to add now..instead of waiting for later time..to add this ammendment thru some senator or somebody for filing 485 during retrogression...
just to know whey we need to wait for later to add this...
Unfotunately thats not the way the US political system works! Just as we are trying to get pro-immigrant stuff in, there are others who are trying to negate our force and in fact get any pro immigrant stuff out! Example, numbersusa.
As I have said in my previous post, we are trying to push for the pro-immigrant package at every step. It could happen now, it could happen later, in the worst case it might not happen at all! There are a lot of forces involved in this.
What is in our control is to keep trying and not give up till the very end. And make no mistake, we are doing that every second coz we are in the same boat as you are.
tattoo Select Right Tattoo Fonts for
maverick_joe
05-07 01:14 PM
its not mandatory to work while on EAD but did you do a job on EAD at any point of time to get out of H1 status?
How long can one stay unemployed on EAD? my pd is Nov2005 EB-2
I got laid-off on Monday I was on H1-b. The employer has notified USICS to withdraw the H1-B. But will not be revoking any GC related stuff. Was on H1-b Laid off 485 pending 180days+ have EAD :(
Your responses will be really appreciated.ASAP
How long can one stay unemployed on EAD? my pd is Nov2005 EB-2
I got laid-off on Monday I was on H1-b. The employer has notified USICS to withdraw the H1-B. But will not be revoking any GC related stuff. Was on H1-b Laid off 485 pending 180days+ have EAD :(
Your responses will be really appreciated.ASAP
more...
pictures calligraphy tattoo fonts.
jonty_11
05-07 02:04 PM
Please let us/me know ASAP.
no details yet but in the past the regulations that have been related to immigration and have not been clear - Like labor substitution have been prone to abuse.....
I am suspecting they will tighten the AC21 just like they abolished labor substitution.
no details yet but in the past the regulations that have been related to immigration and have not been clear - Like labor substitution have been prone to abuse.....
I am suspecting they will tighten the AC21 just like they abolished labor substitution.
dresses calligraphy tattoos. calligraphy tattoos. making
gcgalore
08-05 10:22 PM
I got my approval email today, but my wife's online status remain unchanged received and pending. Does USCIS process dependent's application separately? Both mine and wife's application was sent the same day, FP notices were received at the same time..I mean everything was done at the same time except approval.
Any thoughts?
Any thoughts?
more...
makeup calligraphy tattoo fonts
mbartosik
11-19 12:14 PM
For Nebraska:
https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=NSC
For Texas:
https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=TSC
Summary for I485:
Nebraska has processed most applications that it has had for 7 months (filed on or before April 14 2007).
Texas has processed most applications that it has had for 6 months.
Since 6 months is the target, Texas can be considered to be caught up, and Nebraska will likely have caught up next month.
For I485 that makes the visa bulletin the main issue.
https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=NSC
For Texas:
https://egov.uscis.gov/cris/jsps/Processtimes.jsp?SeviceCenter=TSC
Summary for I485:
Nebraska has processed most applications that it has had for 7 months (filed on or before April 14 2007).
Texas has processed most applications that it has had for 6 months.
Since 6 months is the target, Texas can be considered to be caught up, and Nebraska will likely have caught up next month.
For I485 that makes the visa bulletin the main issue.
girlfriend Japanese Calligraphy Tattoos
Hello_Hello
01-20 06:29 AM
1. Ravi Venkatesh
2. Rani Swami
3. Hema Prabhu
4. Dayal Sharma
5. Chin Chu
6. Dang Wang
These are some of the people I am proud of who are EB-3. Are you proud of them too ?
2. Rani Swami
3. Hema Prabhu
4. Dayal Sharma
5. Chin Chu
6. Dang Wang
These are some of the people I am proud of who are EB-3. Are you proud of them too ?
hairstyles calligraphy tattoos
dehradoon
07-17 05:59 PM
Am I in the same situation? My spouse left US today to INDIA. However we filled the 485 on July 2nd. Will they consider that as abandonment of the application?
You will need to have your spouse back for biometrics, if not then reschedule it early as no show = abondonment of application
You will need to have your spouse back for biometrics, if not then reschedule it early as no show = abondonment of application
qplearn
11-20 08:05 PM
The email id for 60 minutes is:
60m@cbsnews.com
After sending email, put a post here so we know how many emails have gone.
60m@cbsnews.com
After sending email, put a post here so we know how many emails have gone.
nozerd
02-26 09:14 AM
Where is the best place to learn Peoplesoft ? What is future scope of Peoplesoft ? Also where is a good place to learn SAP or Oracle Financials ?
Do local Univ or Community colleges - Computer Science or MIS departments offter these classes ? Does one need to learn C to learn these applications ?
My only prior programming experience is in Basic and Fortran languages eons ago.
Do local Univ or Community colleges - Computer Science or MIS departments offter these classes ? Does one need to learn C to learn these applications ?
My only prior programming experience is in Basic and Fortran languages eons ago.
No comments:
Post a Comment